Vacuum & Electrial Feedthroughs

COAXIAL

USE: Coaxial series are used for transmission purposes. Voltage 1, 5, 10 and 20 kV, Current up to 5 Amps. Available in BNC, SHV-5 kV, SHV-10 kV, SHV-20 kV, MHV, N, SMA and LEMO. Single and double ended, Ground and floating shield, 50 ohm impedance matching type Plug (male connector) to Jack (female connector), High frequency Ready-to-Use UHV compatible In-Vacuum Plug with PEEK® Insulated Coaxial Cables are available.

INSTRUMENTATION MULTI-PIN

USE: Multi-Pin series are used for instrumentation measurement and control purposes.
& Voltage 500 V and Current up to 10 Amps.

Available in Subminiature-D (D-Sub) MIL-C-24308, 9, 15, 25, 37 and 50 pin, BURNDY
4, 8, 12, 19, 22, 30 and 48 pin in both single and double ended, MS Threaded Circular MIL-C-5015
4, 6, 10, 14, 19, 24, 37 and 48 pin in both single and double ended, Easy to fasten with both in-vacuum and air side connectors
Ready-to-Use UHV compatible In-Vacuum Plug with PEEK® Insulated Cables are available.

THERMOCOUPLE

USE: Thermocouple series are used for temperature measurement purposes.

Available in Type K (Chromel®/Alumel®) and T (Cupper/Constantan®), Single and double ended, 2, 3, 4, 5, 6, 7, 11, 12, 15, and 24 pairs
Combination of thermocouple and power feedthrough in 1 or 2 pairs of “K”, “T” with 2 or 4 power pins are also available in the one connector (2-in-1). Easy to fasten with both in-vacuum and air side connectors
Ready-to-Use UHV compatible In-Vacuum Plug with PEEK® Insulated Thermocouple Cables are available.

HIGH VOLTAGE AND HIGH CURRENT

USE: Power High Voltage and High Current series are used for high power heaters and lumps.

Available in 3, 5, 10 and 30 kV to 808 Amps, Water Cooled tubular conductor
For your safety, we also offer air sided silicon insulated plugs.

CERAMIC BREAKS, ISOLATORS AND ENVELOPES

USE: Isolator series are used for insulation up to 24 kV.

Available in With or without bellows, 1/4” and 1/2” Tube ended
NW/KF and ConFlat® Flange mounted, Swagelok® ended
VCR® male and female ended

CERAMIC BREAKS, ISOLATORS AND ENVELOPES

USE: Accessories series are available that connect feedthroughs for both end of vacuum and air side.

Available in UHV compatible, In- vacuum bakeable connector interfaces
In-vacuum coaxial connector with PEEK® insulated ready-to-use cable assembly
Low out gassing In-vacuum PEEK® insulated solid cable, Thermocouple K and T cables
In-vacuum PEEK® or ceramic insulator, In-vacuum contacts, Air-sided plug, Removable tool, Crimping tool